Filter, sump and hose cleaning
Food debris and broken glass removed from the path.

Dishwashers & Kitchen
Standing water and gritty dishes usually have a simple blockage or a weak pump behind them. We trace the path from spray arm to sink drain.
Call or text today615-431-3789Dishwasher Not Draining or Cleaning Repair
When a dishwasher will not drain, the cause may be a clogged filter, a blocked drain hose, a failed drain pump or a garbage disposal knockout plug that was never removed. When it does not clean well, the usual reasons are clogged spray arms, a dirty filter, low water fill, a weak circulation pump or detergent that does not dissolve. The two often travel together.
We handle these calls across Middle Tennessee, from older Nashville kitchens with air gaps and high loops to newer builds with disposals. We drain the tub, clear the filter and hose, test the pump, inspect the spray arms and check the connection at the disposal or sink drain.
What you get
Food debris and broken glass removed from the path.
Pump motors and backflow valves tested and replaced.
Blocked jets cleared and the fill level confirmed.
Knockout plug, air gap and high loop inspected.
The process
We drain the tub and look at the filter and sump.
We test the drain pump, hose and connection.
We clear the cause and run a full wash.
FAQ
A clogged filter, a kinked hose or a stuck drain pump are common causes. We check each.
Yes. If the disposal was installed with a dishwasher connection and the knockout plug was not removed, the dishwasher cannot drain.
Most modern dishwashers do better with scraped, not rinsed, dishes, because the sensors and detergent expect some soil.
Service areas
From Clarksville to Shelbyville and Dickson to Cookeville, pick your city to see the appliance repair and installation work we handle in your part of Middle Tennessee.
Not on the list? Call 615-431-3789. We take projects across Middle Tennessee.
Call, text or send the form. Tell us about the appliance and we will take it from there.