Key takeaways
- Measure the opening width, height and depth, and add clearance for doors and vents.
- Measure every doorway, hallway and turn on the way in.
- Check the fuel, outlet, water and vent connections before you buy.
- Confirm the door swing and any panel or trim requirements.
Measure the opening
Measure the width at the top, middle and bottom, the height from the floor to the underside of the counter or cabinet and the depth to the wall. Compare these with the specification sheet for the new model, not the box size.
Leave room for the door to open and for air to move around the appliance.
Measure the path
Appliances have to get through doors, down hallways and around corners. Measure the narrowest doorway and any stairs, and remember that doors and handles can often come off. Large refrigerators in particular need a clear path.
Tell the installer about the path in advance.
Check the connections
Gas ranges and dryers need a shutoff valve, electric ranges and dryers need the right outlet and circuit, dishwashers and ice makers need water and drain connections and dryers need a vent to the outside. If any of these are missing or wrong, plan for it before the appliance arrives.
Some changes need an electrician, a plumber or a gas fitter.
Check the details
Look at which way the door swings, whether the appliance is panel-ready, how much trim or filler is needed and what the manufacturer says about installation. Small details at this stage prevent headaches on install day.
Ask the installer to review the spec sheet before delivery.
Official sources and further reading
These are independent organizations. Links open in a new tab.
Quick answers
What if my old appliance was a different size?
It happens often. The cabinet may need adjusting or a filler piece. Measure first, then pick a model that fits.
Can you check my measurements before I buy?
Yes. Send us the model you are considering and your measurements, and we will tell you what to watch for.




