Skip to main content
615 Appliances, appliance repair and installation in Nashville TN 615-431-3789

Appliance Guides

Why Your Washer Will Not Drain or Spin, and What to Check

The common causes of standing water and a drum that will not spin, from clogged pump filters to lid switches, with safe checks you can try first.

2 minute read

Key takeaways

  • Standing water usually points to a clogged filter, hose or pump.
  • A washer that will not spin may have an unbalanced load, a lid switch fault or a drive problem.
  • Unplug the washer before you look inside or move it.
  • If water is near electrical parts, stop and call.

Start with the load and the settings

An unbalanced load can stop a spin cycle, and some washers pause and try again. Redistribute heavy items, check that the lid or door closes fully and try a drain-and-spin cycle.

Check that the cycle was not set to end with water held in the tub.

Check the filter and hose

Many front-loaders have a small pump filter behind a panel at the bottom. Coins, socks and lint collect there. Place a towel and a shallow dish under it, open it slowly and clear it. On any washer, check the drain hose for kinks and the standpipe for a clog.

If a nearby sink drains slowly too, the problem may be in the house drain.

The pump, switch and drive

If the filter and hose are clear and water still stays, the drain pump may have failed. If the drum fills and drains but will not spin, a lid switch, a motor control or a drive part may be the cause.

These are the checks a technician makes with a meter.

Know when to call

Call if there is a burning smell, a loud grinding noise, water leaking from the base or a washer that trips a breaker. Unplug the machine and turn off the water first.

Tell us the brand, the model and the error code if one is showing.

Quick answers

Is it safe to open the pump filter?

Yes, with the washer unplugged and a towel ready. Water will come out, so open it slowly.

Can I bleach out the smell afterwards?

Follow the manufacturer guidance for a cleaning cycle. Many models have a special clean setting or a washer cleaner made for them.

Related services

Questions about your project?

Call, text or send the form. Tell us about the appliance and we will take it from there.

615-431-3789Text